Latest Products http://www.vinyltubesindia.com Latest Products Sun, 05 Jul 2020 11:16:02 +0530 en-us http://www.vinyltubesindia.com Plumbing Pipe http://www.vinyltubesindia.com/plumbing-pipe.htm http://www.vinyltubesindia.com/plumbing-pipe.htm Fri, 28 Jun 2019 00:00:00 +0530 Advantage of Vinyl Plumbing Pipes Low thermal conductivity Non-rusting & corrosion proof. Leak proof joints & rust proof bore. Cost effective easy handling, installation & replacement. High resistance to acids, alkaline salt solution, alcohol etc. Non-Toxic, smooth inner surface ensure low frictional loss & high flow rate.   Installation Installation can be concealed Support the pipe line at proper intervals using pipe clips Installation can be done above Ground level inside brick wall Conceal line should be checked for leakage before concealing/ plastering Jointing : Vinyl plumbing pipes can be joined with metal fittings, plastic fittings & use of Teflon tapes are recommended to avoid leakage.   Product Range : Vinyl plumbing pipes as per ASTM: D-1785 & thread as per IS 554 are available in 3 types of plumbing pipes i.e. schedule 40, 80 & 120 and in sizes from ½” to 4” dia SWR Drainage Pipe http://www.vinyltubesindia.com/swr-drainage-pipe.htm http://www.vinyltubesindia.com/swr-drainage-pipe.htm Fri, 28 Jun 2019 00:00:00 +0530 Product Range: 75 mm to 160 mm as per IS13592 pipes are used for drawing of night soils   Jointing: 75 mm to 160 mm as per IS13592 pipes are used for drawing of night soils.   Advantages High flow rate due to smooth inner surface Non-conductive and corrosion resistance Non-reactive with chemical Lightweight, easy handling transportation, installation Good for outdoor weather because of blended with UV stabilizer   Applications Connected with branch lines Used in fixture as WC and urinals Drainage waste water from bath, sinks & wash basins UPVC Casing Pipe http://www.vinyltubesindia.com/upvc-casing-pipe.htm http://www.vinyltubesindia.com/upvc-casing-pipe.htm Fri, 28 Jun 2019 00:00:00 +0530 Vinyl uPVC Casing & Screen Pipes has a higher density than water that provides a clear advantage in good construction. Its yield stress of 55Nlimm is comparatively high. The modulus of elasticity is also high enough to achieve excellent stiffness in pipes preventing undesired deformation of the pipe. Corrosion & Bacteria Resistance. Resistant to all substances dissolved in natural ground waters. Resistant to aggressive and highly concentrated acids and salts. Completely resistant to bacteria in water and soil.   Material PVC-U, unplasticised polyvinyl chloride is an ideal material for manufacturing well pipes as it is impervious to corrosion and chemical action, easy to handle and install, light in weight, non-toxic, non-conductive. Its long service life makes it an economical choice over other materials.   Screen Permeability The possible production capacity of a well basically depends on the following factors: Permeability and yield of the water-bearing strata Permeability of the ļ¬ltering gravel Permeability of the good screen Entrance velocity of the water at the screen   PVC-U Well Casing and Screen pipes for Water Well ConstructionWater covers almost three quaters of the earth’s surface and a major portion of this is found in the oceans or frozen in the Polar Regions. Only a small percentage of fresh water is available as surface water in lakes, rivers, streams and as ground water. Ground water is the nite source and it must be exploited very carefully.The past fifty years witnessed a global expansion of the water well industry particularly as extraction of water from the wells has become lifeline of industry, agriculture,and drinking water supply in cities, towns and villages.Well construction products, therefore, play an important role to ensure the highest quality, efficiency and screens were the natural choice of well design engineers and drillers. However this material was not always found to be suitable, particularly in conditions where rapid corrosion of rapid pipes, deterioration of screens or formation of bacteria resulted in abandonment of the well and worse stillto contaminates the store.Synthetic material that belong to a family of thermoplastics have proven to be the most superior materials for well construction. Among others, unplasticised Polyvinly chloride (u-PVC) that is ieally suited for use in well construction also belongs to this familly of thermoplastics.PVC-U has higher density then water that provides a clear advantage in well construction. Its yeild stress of 55N/mm is comparatively high. The modules of elasticity is also high enough to achive excellent stiffness in pipes preventing undesired deformation of the pipe.PVC-U is resistance to all substances dissolved in naturalground waters.PVC-U is also resistant to aggresive and highly concentrated acid and salts. Its resistant covers a pH range of water between 2 & 12, due to which the chemical used, for cleaning, devloping and regenrating the wells (both organic and inorganic) do not a ect the PVC-U well pipes. PVC-U is completely resistant to bacteria in water and soil.Tensile StrengthThe tensile strength required can be calculated on the basis of pipe weight. In addition to the pipe weight, gravel that gets suck on the joints during the assembly and settlement phase should be considered in design calculations. The lower load bearing capacity of screen pipes with slots should be considered when the scree nular spaces, developing the well or when pumping (due to large differences in water level). The e ect of such pressures cannot be precisely determined. When sinking pipes through clay layers, additional compressive forces are exerted due to swelling clays. This can happen at any depth and in extreme cases may cause considerable strain on the material surface. The values indicated in the tabels of this broucher are based on the minimum wall thickness of the pipes, their diameters and material composition.Impact of TemperatureTemprature conditions prevailing during the laying of PVC-U well pipes will in uence the mechanical properties of the material. High temprature between 30° C and 40° C as indicated by the creep strength in realtion to time, the PVC-U material properties provide su cent safety factor for the intended use. It is however important to determine te other in uences while encasing the well pipes with concrete to seal the drill holes. Temprature increases can b caused by the hydration heat of concrete. Calculations however show that these tempratures do not normally exceed 15°C, with the temprature of unset concrete reaching approx. 18°C, the temprature within the seal will be slightly more than 30°C and that is within the optimum limits. UPVC Pressure Pipe http://www.vinyltubesindia.com/upvc-pressure-pipe.htm http://www.vinyltubesindia.com/upvc-pressure-pipe.htm Fri, 28 Jun 2019 00:00:00 +0530 Range Class I to Class V. Size (OD) 22 mm to 315 mm Standard Length 6 meter. Pressure Rating 2.5 Kgf/Cm2 to 10 Kgf/Cm2   Advantages Being nontoxic, it is safe for drinking water Cost-effective due to its long-lasting properties Easy to transport and install due to its light weight Very economical as it is free from rust & scale formations Low friction ensures lower pumping cost resulting in energy saving Does not require any coating or painting and has long-lasting durability Its seamless, leak-proof and corrosion resistant nature helps to reduce chemical and industrial pollution UPVC Column Pipe http://www.vinyltubesindia.com/upvc-column-pipe.htm http://www.vinyltubesindia.com/upvc-column-pipe.htm Fri, 28 Jun 2019 00:00:00 +0530 Piezometric Pipes http://www.vinyltubesindia.com/piezometric-pipes.htm http://www.vinyltubesindia.com/piezometric-pipes.htm Fri, 28 Jun 2019 00:00:00 +0530 Screen and Casing for Environmental Monitoring Wells Benefits: Quality pipe for well installations Sleeved in a biodegradable* plastic wrap for more sustainability. A first in Australia for reducing plastic waste and helping the environment Available in 50mm (PN18) and 100mm (PN12) sizes 25mm Schedule 40 casing and screen also stocked Well caps to suit Bottom end caps available, including the universal 'FlexiPoint 50'. *Biodegradation of sleeving has been verified by an independent laboratory using ASTM D5511 for anaerobic landfill conditions.   Features Easy installation handling and transport due to low Weight. Suitable for transportation of drinking water due to its inert characteristics. Durability useful life of over hundred years without showing we are due to fouling, Chemical reaction and the surrounding environment. Low-cost compared to other products on the market. Coupling system through the thread with the trapezoidal profile.   Applications of Piezometric Pipes Groundwater Monitoring Sampling of Groundwater Installation of Data Logger   Cut your costs for well installation and operate more sustainably on site: Each pair of 3m lengths of pipe is sleeved in biodegradable plastic, which means the sleeving will biodegrade* away when disposed to a landfill, allowing you to help reduce the amount of plastic waste build-up. Most Environmental screen and casing is wrapped in conventional plastic but this is adding to our plastic waste problem. Only Vinyl Well screen is wrapped in biodegradable* plastic preventing further plastic waste. We also use biodegradable packing tape in our shipments. Vinyl Well screen is made from uPVC, & to class 18 size and is manufactured following the Australian Standard for Monitoring Wells. Each piece has a coarse male/female thread for easy field assembly and is o’ring sealed.   Our Biodegradable* plastic wrapping: Will only biodegrade once in a microbe-rich environment such as a landfill Does not require high oxygen or temperature to biodegrade such as in a commercial compost Helps you to operate more sustainably   Order information : PC05030T18 - 50 mm Casing, Cl 18, 3.0 m, M/F PS05030T18 - 50 mm Screen Cl 18, 3.0 m, M/F, 0.5 mm slits, 4 mm spacings PECFlexi50 - Flexipoint 50, push-in pointed end cap, 50mm PN18, recycled plastic PC10030T12 - 100 mm Casing, Cl 12, 3.0 m, M/F PS10030T12 - 100 mm Screen Cl 12, 3.0 m, M/F, 0.5 mm slits, 6 mm spacings PECFlexi50 - Flexipoint 50, push-in pointed end cap, 50mm PN18, recycled plastic